Brian's Sonic Mach1 Contents Search

X-Calibrator Flashers





These are the flasher tools that I use to tune all of the 1996+ vehicles.  4-Bank switchable custom tuned piggyback chips are used for pre-1996 vehicles or any later model - it is your choice. 

Pricing starts at $399 for the Xcal1 flasher tool and $450 for the Xcal2.  I include up to three custom tunes of your choice Contact me for information on your application. 


The First Compact Hand Held Flash Tool to feature COMPLETE USER ADJUSTABILITY & BUILT IN DATA LOGGING!
The XCalibrator 2 is a very advanced version of our existing XCalibrator flash tool. To meet customer’s requests and to include advanced technology, we have added more features to the XCalibrator 2 than any other flash tool on the market. It is the only USB-based tool on the market, which will simplify customer use and save costs from “proprietary” cables that all other currently available flash tools on the market require for updating or reprogramming. Just as the original XCalibrator, the XCalibrator 2 can be programmed to work on any ODB-II equipped Ford vehicle from 1994-2005.
The XCalibrator 2 has both end user adjustment and high speed data logging capability. Using the keypad, a future firmware update - coming soon - will allow you to make changes to your timing, fueling, fuel injector size, and dozens of other parameters. You can also monitor and data log all critical parameters by both connecting the XCalibrator 2 to your PC and using the SCT Live Link software, or by using the built-in LCD display. Currently only PC datalogging is supported, but the standalone datalogging will be available in August with a firmware update.
The XCalibrator 2 also allows 2 analog inputs when data logging (such as Wideband O2s). Also, because everyone should know what those Check engine lights mean, the XCalibrator 2 allows you to read and understand these codes the minute they appear so you can get back to enjoying your favorite vehicle.

---->> User adjustability will be released in an upcoming firmware update <<--

Option availability and range adjustment may vary based on vehicle type and/or custom tuning dealer.


TUNE your own vehicle
MONITOR & Adjust
your vehicles DATA &
Datalog Hundreds of
your vehicles EEC
The XCalibrator 2 arrives
Pre-Loaded with up to 3 SCT
Wide Open Throttle:
Leaner to 14% Richer
Global Spark: -5 to +5 degrees
RPM Adjustment Spark:
0 - 2000RPM: -14 to +4 degrees
2000 - 4000RPM: -8 to +4 degrees
4000 - 8000RPM: -8 to +4 degrees
Diagnose Check Engine Lights & Clear Trouble Codes
2.73 to 5.14 Ratios
80mm to 90mm Lightning SCT Big Air BA-2400 & BA-2800 MAF Meters
205/65/15 to 315/35/19
19lb to 60lb Fuel Injectors
Idle RPM: -300 to +300RPM
Cooling Fan: On / Off Temp
Traction Control: On / Off
Two Step: On / Off & RPM
Automatic Transmission Shift Schedule:
WOT 1st - 2nd: -3 to +7mph
WOT 2nd - 3rd: -4 to +8mph
WOT 3rd - 4th: -5 to +10mph
WOT 4th - 5th: -5 to +10mph


XCalibrator 1


  • Increases Horsepower, Torque, Gas Mileage and Throttle Response
  • Pre-Programmed with up to 3 Custom Calibrations specifically for your vehicle
  • Retains the Factory Calibration for easy restoration back to the stock calibration
  • Easy installation. No tools necessary
  • Quicktune 2005 Custom Tuning included (optional programming cable required, sold separately)
  • Easy to use push button and LED interface
  • Quickly Flashes PCM via the OBD-II diagnostic port


THE WAIT IS OVER. SCT is the first aftermarket company to release a Multi-Program Flash Device and Custom Calibrations for the all new 2005 Mustang.  SCT's new Xcalibrator will allow you to flash your new '05 Mustang with up to 3 Custom Calibrations, and also allow you to tweak your Custom Calibration using our new Quicktune 2005 Custom Tuning Software.  Also available for the first time anywhere are Custom Calibrations for 2004+ F-150 Gas Trucks and the 2003 - 2005 F-250 through F-550 6.0L Diesel Ford Trucks.
Other software firsts include Custom Calibrations available for the SVT Focus, Lincoln LS, Thunderbird, and the Ford GT Supercar.  The XCalibrator can be programmed with up to three custom tunes specifically calibrated for your vehicle. 
To program your vehicle you follow a very simple sequence using the XCalibrator’s 5 LED’ s and 2 buttons on the front of the unit.  Simply plug the device in and using the Select button pick the custom program you wish to load.  Once you have selected the desired program, you simply hold down the program button for two seconds.  The LED for the matching program number will flash as it saves the factory file and uploads the custom program.  YES!  It is that easy!